Removing Massive Graffiti from Metrolink Trains
Los Angeles Pressure Washing Inc expertly removed years-old graffiti from these Metrolink... Read More
Bare Brick, Stone & Masonry Graffiti Remover
Find Your Local Distributor- Demo Gallery
- Product Info
- SDS & Technical Data
- Shipping Info
- Guarantee & Disclaimer
- Reviews
A compilation of removals and building restorations using World's Best Bare Brick Stone and Masonry Graffiti Remover.
Previous Projects
Graffiti Removal for the Grand Opening of Taylor Yard Bridge, CA
Large-Scale Graffiti Removal
S&N Pressure Washing completed a 30,000 square feet graffiti removal project in a downtown Los Angeles warehouse, preparing it for filming the next day.
Removals Using Bare Brick, Stone and Masonry Graffiti Remover
Graffiti Removal from Brick and Cinder Block
Graffiti Removal from Split-Face CMU (Concrete Masonry Unit)
Spray Paint Removal from Exposed Aggregate Concrete
Graffiti Removal from Broom-Finished Concrete Slab
Graffiti Removal from Tree Bark
Product Description
Bare Brick, Stone & Masonry Graffiti Remover (BBSM) is a highly effective, economical, and biodegradable remover for all types of spray can paints, oil, latex, and water-based paint overspray. It is also effective on paint spill stains, grease, grime, smoke, and oil stains, as well as other marks on porous brick, stone, and concrete surfaces, including cinder block, split face block, and exposed aggregate.
Features & Benefits
- Environmentally Friendly: Go green with World's Best Graffiti Removers. BBSM Graffiti Remover is easily rinsed with a small pressure washer requiring very little rinsing water. Any resultant run-off is a readily biodegradable gray water soap that can be left to biodegrade, recycled, or further diluted for use in gardens, etc.
- No Damage or Shadows: No shadows, no damage, and no harsh scrubbing required.
- Safe & Pleasant: Pleasant smelling and nontoxic. Safe and effective to use on all types of natural stone (such as limestone, granite, and marble), stainless steel, trees, plastics, and playground equipment.
- Versatile Use: It may be used on painted surfaces as well as natural building surfaces after first wetting surface with water.
Product Use Instructions
BBSM Graffiti Remover is applied to the surface with a nylon brush, broom or pump-up sprayer, 3 times at 3 minute intervals, liberally flooding the graffiti with the product. For typical graffiti, approximately three minutes after the final application, pressure washer (hot water is best).
If one is not available then a stiff, nylon brush and bucket of water may suffice.Agitation, as you apply this product, can be of great assistance.
Continued experience with the product will enable the user to judge how many applications are necessary for varying surfaces and particular spray cans. On older/thicker graffiti, patience is the key. Keep the graffiti wet with the product, as long as possible before rinsing.
Remember, a pressure washer in this instance is used as a quick release rinse of the dissolved graffiti, and not the primary means of cleaning.
Ideally use 1500 - 2000 psi with a 15º or 25º fan jet at about 6 inches from the surface. When rinsing dissolved graffiti with a pressure washer try to remove a LITTLE of the graffiti from the bottom of the tag without wetting the whole area. If satisfied, then proceed to full scale.
Wash the whole area from top to bottom.
Remember if the remover has not done its job then no amount of ‘blasting’ will fix the problem. Failures are usually a result of not flood coating adequately and not leaving product on long enough and cannot be resolved by blasting too close or at higher pressures. Do not use ‘turbo’ type nozzles, or blast too close, as you may cause damage and will possibly only remove a small percentage more.
For further removal tips, PLUS removing graffiti from Wooden Fences, Trees, Oil Stains, Gum Residue and Smoke Damage, download technical data sheet here or visit our Expert Advice page.
Coverage Guidelines
1 gallon of BBSM graffiti remover will remove approximately:
- Concrete, Brick, Block, or Masonry Surfaces: 1 gallon of BBSM graffiti remover will remove approximately 200 sq ft of typical graffiti.
- Sandstone, Limestone, and Other Soft Absorbent Surfaces: 1 gallon will cover approximately 80 sq ft (per 3 flood coat application).
- Painted/Coated Surfaces: Up to 1000 sq ft per gallon.
Exact coverage varies depending on type of stain and the porosity of surface material.
Previous Projects
Graffiti Removal for the Grand Opening of Taylor Yard Bridge, CA
Quick & Easy Graffiti Removals
Visit our Demo Gallery for more removal jobs.
Technical Documents
Suitable Surfaces
Brick Wall & Buildings
Concrete (Incl. Exposed Aggregate)
Split Face Block /Cinder Block
Natural Stone (Limestone, Sandstone, Granite, Marble)
Natural Environments
Stainless Steel
Plastics & Playground Equipment
Trees
Wooden Fences
Pavements & Driveways
Application Methods
Brush On
Broom On
Spray On
Temperature Usage
Hot weather removals: Where possible avoid large-scale removals in direct sunlight on very hot days. Wet the sur-face down first and apply BBSM per the above instructions to the damp (not dripping wet) wall. This speeds up the removal process considerably.
Cold weather removals: Allow for longer dwell times in cold weather. Expect considerably slower reaction times in weather below 40° F / 5°C. Dwell times need to be 2-3 times longer to yield the same results, and it’s often helpful to leave the product on much longer than that. It helps to keep the product indoors and even inside the car so that the products are at room temperature when you apply them.
Use a hot water pressure washer / steam cleaner if possible. Sometimes it helps to use it to first heat up a section of graffiti before removing it.
During the winter months, we will sometimes apply BBSM remover several times and then leave TRANSGEL on over that which helps it stay wetter for longer and eats through all the thicker bits of graffiti as well as penetrating and dissolving from behind.
As a rule, larger graffiti removal projects are best left for warmer weather rather than cold / freezing conditions.
Coverage Guidelines
Exact coverage varies depending on the type of stain and the porosity of the surface material.
| Surface Type | Approx. Coverage (per gallon, per coat) |
|---|---|
| Concrete, brick, or masonry surfaces | ~200 sq ft (18.5 m) |
| Limestone, sandstone, plaster, or other soft absorbent surfaces (per 3 flood coat applications) | ~80 sq ft (7 m) |
| Painted or coated surfaces | ~1000 sq ft (93 m) |
Technical Data
| Composition | Premium aromatic liquid blended from natural alcohols, citrus oils and water-soluble surfactants |
|---|---|
| Color | Orange Brown liquid |
| Odor | Odorless |
| pH | ~ 12-14 |
| Storage | Store in a cold, dry place away from heat or flames. |
| Shelf Life | Approximately 2 years but up to 5 years in an unopened container. |
| Precautions | Flammable |
| DOT Classification | UN2924, Flammable liquid, corrosive, n.o.s., (Ethyl Alcohol, Potassium Hydroxide), 3, (8), PG III |
Instructions for Use
Bare Brick Stone & Masonry Graffiti Remover (BBSM) is applied to the surface with a nylon brush, broom or pump-up sprayer, 3 times at 3 minute intervals, liberally flooding the graffiti / stain with the product. For typical graffiti, approximately three minutes after the final application, rinse using a hot or cold pressure washer (hot is best) at low pressure. If one is not available then a stiff nylon brush and bucket of water may suffice.
Agitation, as you apply this product, can be of great assistance. Continued experience with the product will enable the user to judge how many applications are necessary for varying surfaces and particular spray cans.
On older / thicker graffiti, patience is the key. Keep the graffiti wet with the product, as long as possible before rinsing.
Remember, a pressure washer in this instance is used as a quick-release rinse of the dissolved graffiti, and not the primary means of cleaning. Ideally, use 1500 - 2000 psi with a 15º or 25º fan jet at about 6 inches from the surface.
When rinsing dissolved graffiti with a pressure washer try to remove a LITTLE of the graffiti from the bottom of the tag without wetting the whole area. If satisfied, then proceed to full scale. Wash the whole area from top to bottom. Remember if the remover has not done its job then no amount of ‘blasting’ will fix the problem. Failures are usually a result of not flood coating adequately and not leaving the product on long enough and cannot be resolved by blasting too close or at higher pressures. Do not use ‘turbo’ type nozzles, or blast too close, as you may cause damage and will possibly only remove a small percentage more.
Tips for Effective Use of Bare Brick Stone & Masonry Graffiti Remover
TIP 1 Some spray cans such as reds can stain surfaces. Other spray cans change colors once Bare Brick Stone & Masonry Remover has been applied. For complete and total removal of these stains use our FELTPEN FADEOUT after or while BBSM is still on the stain.
TIP 2 If you are fixing someone else’s former failure and may be having problems, then BBSM can be left overnight on the wall (if safe to do) ensuring maximum dwell time. Return in the morning and the problem will usually be solved with another application and a wash-off.
TIP 3 As a general rule, avoid trying to remove spray can graffiti from porous unpainted surfaces, whilst the walls are facing the hot summer sun. Wherever possible, try to work in the shade or during a cooler time of day. On days when there is a likelihood of the graffiti remover drying out within minutes or less, the wall can be thoroughly wet with water first and towel patted dry BEFORE applying BBSM).
Instructions for use:
Removing Graffiti from Painted Surfaces
Some larger tags on pre-painted acrylic walls can be removed without damage using BBSM and the technique described below. Of course, the best alternative is to color match and repaint, but if this is not an option, proceed as follows:
- Thoroughly wet down the wall with pressure washer.
- Using a soft nylon broom and a rectangular bucket containing BBSM, apply and agitate about 10 square feet of the graffiti until approximately half disappears (the graffiti is dissolving and running).
- Using low pressure, quickly rinse the treated area, and thoroughly wet down ahead to repeat the same on the next section. Approximately 95% of the spray can graffiti should be gone. If you find that it is affecting the underlying paint, you will have to shorten your initial application time. The reason you stop at approximately half dissolved is because the rinsing tends to remove another 50% more than you have.
- Carefully spot-clean any uncleaned areas using SENSITIVE SURFACE GRAFFITI REMOVER.
If the dissolved graffiti has stained the wall, a dilute application of FELTPEN FADEOUT will return it to its former glory. With this technique never use hot water! (It will blister the underlying paint).
Removing Graffiti from Wooden Fences
If color matching and painting is not a preferable option, BBSM may be used to clean a wooden fence. Always test first in an inconspicuous area to ensure there is no discoloration. Use BBSM per instructions for brick, stone and masonry surfaces above. You will most likely leave a clean patch when rinsing with a pressure washer requiring you to rinse an entire section of the fence.
If BBSM appears to darken the surface on your test patch, TRANSGEL may be a better option.
Removing Graffiti from Trees
Brush on BBSM and agitate with the brush as you apply. Depending on the type of graffiti, you may need more than one coat and a little dwell time between coats to ensure the spray can is fully dissolved before rinsing.
Once the graffiti has dissolved, use a pressure washer to rinse, taking care not to blast too close to the tree so as not to remove any bark or etch the surface. Using a yellow 15° tip, or green 20° tip, stand back as much as possible and keep the wand moving along the tree to avoid damage, as seen in the photos below; Alternatively, a stiff bristled nylon scrub brush and a bucket of water can be used to rinse the tree’s surface.
Removing Oil Stains from Pavements and Driveways
Flood coat BBSM onto oil stains on concrete and leave for as long as possible. Agitate with a nylon scrubbing brush whilst adding more applications. When satisfied that all oil is dissolved, use high-pressure water to rinse away the stain (hot water is best).
Removing Chewing Gum Residue (Gum Ghosting)
Some stains are often left after removing gum with hot, high-pressure water or steam. Brush BBSM onto the residue and high-pressure hot wash.
Removing Smoke Damage from Brick or Stonework
BBSM can be highly effective in the removal of burnt-in or resistant smoke damage. Use as instructed for brick, stone & masonry applications.
Safety Issues
BBSM is very safe to use in comparison to most graffiti removal products. However, the intended use is for stripping paint, waxes and oils from building surfaces and is thus naturally much more aggressive on skin and eyes than normal everyday cleaners. If the intended user is not familiar with or confident in implementing the safety precautions below, we urge that they do not use the products.
- Always wear solvent alkali protective gloves, goggles and long sleeve clothing.
- Be sun smart. Wear a wide-brimmed hat; after all, you are outside.
- Always know where water is available in case of a splash.
- Carry a spare set of clothing. Do not leave contaminated clothing on.
- Use in well-ventilated areas.
Limitations
- Always wear solvent alkali protective gloves, goggles and long sleeve clothing.
- Be sun smart. Wear a wide-brimmed hat; after all, you are outside.
- Always know where water is available in case of a splash.
- Carry a spare set of clothing. Do not leave contaminated clothing on.
- Use in well-ventilated areas.
Caution
Before commencing any large-scale use, always test first in an inconspicuous area. This product is designed to remove all types of markers and stains, and may have an unpredictable or even damaging result on certain man-made or stained surfaces. If necessary, wait for the surface to dry to ensure perfect results.
Environmental Care
World's Best Bare Brick, Stone and Masonry Graffiti Remover is biodegradable and conforms to all statutory environmental requirements for graffiti removal including VOC limits. Designed to be fast, effective and non-damaging requiring very little rinsing water. If necessary, water can be collected using a wet vac and disposed of safely.
We believe nothing other than rainwater should enter our precious stormwater systems.
Your shipment is our number one priority!
- All Orders received before 1pm PST are processed same day.
- All Orders under 90 pounds ship via Fed Ex or UPS Ground.
- Consolidated Shipping Charges for Orders are calculated as follows:
| Order Amount | Shipping Incurred |
|---|---|
| $0 - $75 | $15 |
| $76 - $150 | $20 |
| $151 - $300 | $30 |
| $301 - $450 | $40 |
| $451 - $600 | $50 |
| $601 - $750 | $60 |
| $751 - $900 | $70 |
| $901 + | $80 |
- ‘Free Shipping’ Items excluded from all Shipping Charges.
- If some of your items qualify for Free Shipping but others do not, Shipping Charges will be calculated on the total order value less the Items which qualify for Free Shipping.
- Shipping of hazardous materials will incur additional charges of:
5 Gallon Pails | Hazmat Fee | |
1 | $54 | |
2 | $108 | |
3 | $162 | |
4 + | $216 | |
Max Hazmat Shipping of $216 on any size order. | ||
Hazmat shipping requires a direct signature at delivery.
Please note that hazmat shipments cannot be held at hubs or rerouted to a different address once shipped. FedEx will make 3 delivery attempts. If the package cannot be delivered because there isn't someone to sign for it, then it will be returned to us.
We reserve the right to use a variety of carriers to deliver product and will contact you to confirm the best shipping method available when your order is processed.
- Exact Freight Method and estimated delivery date will be confirmed via email.
- International Orders: Purchase through your local distributor or contact us at sales@graffitiremovalinc.com.
- This shipping policy is for internet orders processed through this website and applies to Mainland USA customers only.
Please call us at 1-888-747-9247 or email sales@graffitiremovalinc.com to arrange best shipping method or ask any questions.
Our goal is to ensure you utilize the best possible products and techniques to achieve the highest standard of excellence and safety. Your purchase is covered by a 30 Day, 100% Money Back Guarantee. If you feel you need to exchange product or return for a full refund for any reason over this period, contact us to discuss the best solution.
Please note: URG cannot guarantee the results of work carried out using our products in all circumstances. The applicator of the product should review proper use instructions, carry out testing, and be responsible for the final result.
Warranty Disclaimer & Limitation of Liability
Please read and follow label directions and observe all safety precautions in the use of our products. Because conditions of product use are outside of our control and vary widely, the following is made in lieu of all express or implied warranties: Products will conform to Urban Restoration Group US, Inc.'s published product specifications and be free from defects in material and manufacture on the date of purchase.
Except where prohibited by law, Urban Restoration Group US Inc., further disclaims, and shall not be liable for any incidental, special, consequential or indirect loss or damage and/or personal injuries including death arising from the use of our products or the cost of labor involved in its application or any reapplication of products that is replaced, regardless of the legal theory asserted.
SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, CONCERNING THE USE OF PRODUCTS OTHER THAN INDICATED ON THE LABEL. BUYER ASSUMES ALL RISK OF USE AND/OR HANDLING OF PRODUCTS AND MATERIAL WHEN SUCH USE AND/OR HANDLING IS CONTRARY TO LABEL INSTRUCTIONS. NO OTHER WARRANTIES ARE MADE, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION WARRANTIES AS TO MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN ALL EVENTS, URBAN RESTORATION GROUP US, INC'S LIABILITY SHALL BE LIMITED SOLELY TO THE REPLACEMENT OF THE PRODUCT PURCHASED.
This limited warranty may not be modified or extended by manufacturer's representatives, distributors or dealers of Urban Restoration Group US, Inc. products. This warranty gives the purchaser specific legal rights, as well as rights which may vary from state to state. Urban Restoration Group US, Inc. specifically disclaims any and all other obligations or liability to any party relative to the sale, use or application of its products.
If product is defective upon your receipt, your exclusive remedy shall be, at Urban Restoration Group US, Inc.'s option, to replace the product or refund the purchase price of the Urban Restoration Group US, Inc. product.
Customer Reviews
Based on 168 reviews
96%
(162)
3%
(5)
1%
(1)
0%
(0)
0%
(0)
k
Gallon
Best product ever I own a pressure washing company don’t know why I’ve never discovered this before. I wish I could send the before and after pics unbelievable product
J
Gallon
Best graffiti product!!
C
20 oz. Spray Can
Worked amazing
D
Quart
I haven’t found a better product for removing graffiti. I definitely recommend it to everyone!
e
It works just like it says then some also ordered some Worlds best Detergent for the stairs at the homeless shelter that i work at and again works just as it says will recommend this product to everyone that i talk to this deserves a higher ranking like a 10 out of 10