Cómo eliminar grafitis de láminas de plexiglás, lexan o policarbonato

Cómo eliminar grafitis de láminas de plexiglás, lexan o policarbonato


Unlike most other graffiti removal products, generally none of our graffiti removers will affect clear plastic sheeting. If you're removing smaller graffiti or magic markers and wax crayons use Safewipes or Sensitive Surface Graffiti Remover.


For removal jobs involving large amounts of spray can, use Bare Brick, Stone & Masonry Graffiti Remover in conjunction with a cold water pressure washer. 

removing graffiti, stickers and tags with safewipes and sensitive surface graffiti remover
These tags & stickers can easily be removed with Safewipes or Sensitive Surface Graffiti Remover.

Unfortunately, the previous use of harsher solvents have already damaged the plastic.

If the polycarbonate and acrylic sheet is already very old, degraded by UV or cloudy from other solvents being used, there is a chance that it may be damaged further by any removal product. As always, test a small area first and wait until the sheet dries before full-scale removals. This is because any cloudiness may be hidden by wetness. 


Remember, green scouring pads will scratch plastic sheet materials such as Plexiglass, Lexan, and Perspex, so go easy on the agitation.


Products Mentioned

Sensitive Surface 
Graffiti Remover
Sensitive Surface Graffiti Remover

From $22.00

For Signage, Painted & Smooth Surfaces

Graffiti 
Safewipes
transgel paint remover

From $6.50

Remove Graffiti, Grease, Grime & Other Marks On Painted & Smooth Surfaces

Bare Brick Stone & Masonry Graffiti Remover
bare brick stone and masonry graffiti remover

From $21

For Bare Brick, Stone, Concrete, Block Walls & Masonry

wORLD'S bEST tIPS

Graffiti Safewipes Remove Wax Crayon from Powder Coated Newspaper Vending Box.

1) If graffiti is not coming off easily, you're doing it wrong. You may require a change of tact or use of another product.

2) If you can't remove a little bit of graffiti, then you're not going to remove a lot! TEST FIRST before applying product to an entire job. This way you can determine if you’re on the right track before embarking on full scale removals.

3) If you're working hard, you're doing it wrong. Forget the scrubbing, blasting and any other abrasive measures. Put simply, either your products are working or they’re not. Any problems can be taken care of with the right technique.

Expert Advice

Click on any of the icons below for more how-to's and advice