Graffiti Removal RSS

Generally, most graffiti tags on windows and glass can be easily wiped away using Safewipes or Sensitive Surface Graffiti Remover in the conventional way.       Larger spray paint graffiti on windows can be removed using Bare Brick Stone & Masonry Graffiti Remover.   When dissolving a lot of spray paint on windows brush or broom it on in sections and agitate as you apply to fully dissolve the graffiti before rinsing it off a few minutes later with your pressure washer. Stand back and use a green 25° tip taking care not to use too much pressure.  ...

Plus

The main thing to remember is when temperatures fall into the 40°'s and 30°'s, spray paints, inks and crayons take much longer to dissolve.

When working with Bare Brick Stone & Masonry Graffiti Remover or Sensitive Surface Graffiti Remover, dwell times sometimes need to be 2-3 times longer to yield the same results. It's often helpful to leave your remover on much longer than that before rinsing.

Plus

  For graffiti on porous bricks, block walls and stone, use our Bare Brick, Stone & Masonry Graffiti Remover (BBSM).   On typical graffiti, simply flood coat three times (at roughly 3-minute intervals), wait another few minutes then rinse with a small pressure washer.   Graffiti on Cast Concrete Flood Coat with Bare Brick Remover Final Rinse with Pressure Washer   Agitation as you apply this product can be of great assistance. Continued experience with the product will enable the user to judge how many applications are necessary for varying surfaces and particular spray paints. On older/thicker graffiti, patience is...

Plus

There are a number of ways to approach graffiti on a wooden fence. The best solution will mainly depend on the condition of the fence, and scale of the job.     The simplest and quickest option may be to color match and paint the fence. If necessary you can take a sample piece to your local paint store for an accurate color match. Remember to paint an entire section from top to bottom and end to end, as it will be far less conspicuous than leaving small patches of paint especially when it rains, which is likely to reveal...

Plus

Understanding the different types of street signs will help you determine the vulnerability of each sign before approaching them. Screen printed signs that are likely to be placed in a location highly susceptible to graffiti, must be protected with a vandal film (aka protective overlay film) commonly manufactured by 3M (and other film/laminate suppliers). Once this laminate is on the sign, any of our products are suitable for cleaning.     However, we have noticed that the continued use of harsher strippers, thinners, and other solvents, as well as expo- sure to UV sunlight has a tendency to make these...

Plus