Feltpen Fadeout (FPFO) is designed for the final removal of shadows and traces of inks and dyes and other graffiti markers from all surfaces; porous and nonporous.

FPFO will also remove some spray can stains / ‘ghosts’ (particularly reds) from delicate and porous surfaces, and is designed to work in conjunction with World’s Best Graffiti Removers.

FPFO can be diluted with water to use as a high foaming cleaner for the removal of organic stains dirt and fats as well as sanitize surfaces killing microorganisms (germs, bacteria, fungi, etc.)

FEATURES & BENEFITS

Unique UV sensitive formulation draws inks and other stains out of surfaces.
Can be used while BARE BRICK STONE & MASONRY REMOVER or SENSITIVE SURFACE REMOVER is still on the stain OR After dissolving as much of the graffiti as possible using these removers (choice of remover depends on the type of substrate.)
Excellent for removing leather dyes and inks that have shown resistance to removers, ‘burnt into’/stained paintwork or coated surfaces, or wrapped into porous surfaces creating a stain.
When diluted, creates a highly active cleaner for use cleaning smoke films, greasy marks, carbon deposits, food spills, mold, fungi, and other soilage.
See product use instructions on TDS sheet for further details.

INSTRUCTIONS FOR USE

Removing Ink and Dye Stains

After removing as much of any graffiti marker as possible, pour a small quantity of Feltpen Fadeout (FPFO) into a small bucket and then apply as thickly as possible to the remaining shadows with a nylon brush. When shadows have disappeared, wipe clean with a damp toweling cloth.

On all smooth or porous surfaces including signage, plastics, stone, concrete, granite, or marble, you must attempt to remove as much of the graffiti as possible by first applying SENSITIVE SURFACE REMOVER (SSR), in the case of marking pens, or BARE BRICK, STONE AND MASONRY REMOVER (BBSM) in the case of spray can paints.

The time taken to work completely will vary from instantly, to several minutes, to even overnight in some cases. On inks or dyes splashed or thrown onto concrete, brick, or
porous surfaces, etc., it may be necessary to leave Feltpen Fadeout (FPFO) on overnight. When doing this, we suggest applying FPFO as thickly as possible and
covering it with black plastic. You can tape the plastic to the wall along the three bottom sides first, and then brush on as much FPFO as possible before sealing the top of the
bag onto the wall.

This will keep the product wetter for longer, as well as prevent anyone from rubbing up against the wall on the affected area. Occasionally, some markers or spray can paint shadows that may not appear to have been affected by FPFO. However, wiping off with a damp cloth in the case of smooth surfaces or pressure cleaning in the case of brick, stone, or masonry surfaces can achieve quite surprising results. Do not be concerned if you need to apply this product more than once.

REMOVING SPRAY CAN STAINS

Feltpen Fadeout is extremely beneficial in removing certain spray can stain on porous masonry and concrete. After dissolving as much graffiti as possible with Bare Brick Stone and Masonry Graffiti Remover, an application of FPFO during or after the final rinse will eliminate any remaining pigment or stain in the surface. See product use instructions on TDS sheet for more detailed instructions and tips.

COVERAGE AND APPLICATION GUIDELINES
Exact coverage varies depending on the type of stain and the number of applications needed.

DILUTED CLEANING APPLICATIONS
Feltpen Fadeout (FPFO) can be used as a high foaming cleaning concentrate with bleaching action when diluted with water.

Dilute with water as follows:
Light soilage 1:100
Regular cleaning 1:20-50
Mold removal: 1:20
Heavy soilage: 1:10
1. Make up a desired diluted solution of FPFO.
2. Wash the surface with the solution.