Graffiti Removal RSS

GRAFFITI REMOVAL When using our products, shadows on porous surfaces can be avoided byensuring the graffiti is flood coated adequately, with enough dwelltime to fully dissolve the graffiti before rinsing. For example, if youapplied Bare Brick Stone & Masonry Remover as instructed but thenfound that an extra coat faded the graffiti more - It generally meansthe dwell time wasn't long enough the first time. So always remember toFLOOD coat graffiti generously and leave it on...THE LONGER, THE WETTER,THE BETTER! Let the products do the work for you. The last thingstarted is always your pressure washer.    If necessary, leaving ‘Bare...

Weiterlesen

GRAFFITI REMOVAL For graffiti on porous bricks, block walls and stone, use our Bare Brick, Stone & Masonry Graffiti Remover (BBSM). On typical graffiti, simply flood coat three times (at roughly 3 minute intervals) , wait another few minutes then rinse with a small pressure washer. Graffiti on Cast Concrete Flood Coat with Bare Brick Remover Final Rinse with Pressure Washer Agitation, as you apply this product, can be of great assistance. Continued experience with the product will enable the user to judge how many applications are necessary for varying surfaces and particular spray cans. On older/thicker graffiti, patience is...

Weiterlesen